•  
    您好!歡迎來到我們的網站
    鎮江百靈船舶用品有限公司??
    24小時服務熱線:
    20年生產循環水處理
    0511-85728888
    為廣大用戶提供優質的產品和完善的服務
    Zhenjiang Bailing Ship Supplies Co., Ltd.?
    產品中心
    地址:鎮江市民營開發區
    公司網址:WWW.ZJBLCB.COM
    聯系電話:0511-85728888
    公司傳真:0511-85728028
    郵編:212111
    聯系我們
    你的當前位置為:
    白靈牌902C型電器設備清潔劑
        發布時間: 2019-08-05 09:20    




    白靈牌902C型電氣設備清潔劑



    902C型電氣設備清潔劑可在工作現場直接清洗電機等電氣設備,清洗時不必完全拆卸電器,也可清洗正在運行的電器設備,使用902C型電器設備清潔劑可以延長設備使用壽命,預防設備故障,減少火災危害,確保設備的正常運行。


      1、消除引起電器設備故障的油污、粉塵、鐵屑、碳水分等雜物,練手摸不到的部位也能清洗干凈。


      2、耐壓25KV,可以清洗正在運行中的電器設備。


      3、902C型電器設備清潔劑是一種精致的溶劑,能夠投完全會發,會發后不留任何殘漬。


      4、沒有汽油、稀料那樣的引火性危險。


      5、不用完全拆卸就能清洗,可以節約檢修時間及維修費用。


      6、對多數金屬、涂料飾面、絕緣覆蓋層及耐油的橡膠、塑料均安全無害。


    特點


      外觀:無色透明液體


      氣度:溶劑味


      耐電壓:25KV


      比重:1:0.8


    用途


      電器設備:用于電動機、發動機、配電開關柜、變電設備、配電視設備、大型電磁門、切換開關、自控開關、電焊機、各種電動工具等設備的清洗。


      機械設備:主要用于機械設備及各種部件的油污、脫脂處理,如油壓機械的汽缸、各種過濾器、齒輪箱、軸承、鐵鏈機構,精密加工的焊接面及砂輪皮帶的打磨面等機械設備和零部件的清洗。


    使用方法


      1、電機:蔣電源斷開后,用160#噴槍接0.4-0.6MPa的壓縮空氣,將鐵粉、塵土、線頭等雜物吹除(對帶電刷的電機,如果電刷已損耗或火化較嚴重時,請及時更換或處理),然后用噴槍吸入902C型電器設備清潔劑進行噴洗,洗凈后再用客氣充分干燥,必要時候清向軸承部位加注潤滑油等。


      2、小型電機:可不用拆開電機,直接浸泡于902C型電器設備清潔劑中,數分鐘后撈出,用壓縮空氣吹干,由于潤滑油和軸承油也同時被洗掉,清注入潤滑油等。


      3、其他電器設備及機械設備:用壓縮空氣將鐵粉、粉塵、塵土、碳粉等污物吹掉,再用902C型電器設備清潔劑洗,然后徹底風干。


      4、機械零部件,蔣拆卸下來的零部件浸泡于902C型電器設備清潔劑中片刻,然后撈出擦干或用壓縮空氣吹干。


      5、當用碰噴壺清洗時,應采用“皮老虎”或點吹風等配合風吹干和風干。


    注意事項


      1、直流以及高壓電機,異常發熱或污垢極嚴重的電氣設備,必須斷電清洗,然后充分吹干。


      2、因902C型電器設備清潔劑具有溶劑味,使用環境應通風好。


      3、請不要使用于電子計算機,電子程控裝置、數據處理設備等精密段電子裝置和設備。


      4、使用時請遠離貨源。


      5、所使用壓縮空氣應不含水汽或經過干燥處理。


      6、用后需密封存放。


      7、貯存處應遠離火源。


     包裝


      25公升塑料桶


     


    902C Cleanser for Electric Equipment 


    This cheaner can be used directly to clean electromtors and other electric equipment in the working site. When clean, it's not necessary to remove all the apparatus. It can also wash
    the electric equipment under operation.So it can prolong the sevice life, prevent troubles, reduce the fire disaster and ensure for equipment a normal performance to use Type 902C cleaner.


    1. Can eliminate the oily soil, powder dust, iron scurf.carbonic powder.water and other sundries which can cause the troubles of equipment. Even the part the hand can't touch can also be cleaned.


    2. The withstand voltage is 25KV.11 can wash the electric equipment under operation.


    3. It's a refined solvent.can completely volatilize.After volatilization there's not any remainder.


    4. There's not such ignition danger as gasoline or paint thinner.


    5. It can save the time for repair and the cost for service cleaning the equipment without complete removal.


    6. There's no harm to the most metal,overcoating,isolate layer and oil-resistant rubber and plastics.


    Feature


    Appearance:Colorless transparent liquid
    Odour:Solvent type smell
    Withstand Voltage: 25KV
    Gravity: 1:0.8


    Application
    Electric Equipment: Used for the cleaning of electromotor, generator, switch cabinet for distributioatransformer facilities, equipment for switching house, large type of magnetic valve.
    commutator.automatic control switch.electric welding machine,various power tools and others.


    Mechanic Equipment: Mainly used for the greasy dirt-removing and detailing treatment of mechanic equipment and parts and components,such as the cleaning for cylinder of hydraulic machine,various filters,gearboxes,bearings,chain mechanism.precision finishing welded surface.buffing surface of abrasive disk and belt and other mechanic equipment and parts and components.


    Method


    1. Electromotor: After cutting off the power, blow off the iron powder, dust. stub and other sundries with the comperssed air from # 160spray gun connected to 0.4-0.6MPa compressor first, (To the motor with electric brush, please replace or repair the brush timely if it has been worn or its spark has been more seriousj.then spray and clean the motor with the spray gun which has sucked Type 902C cleaner.After washout, dry it fully with air. If necessary, please pour the lubricating oil to the position of the bearing.


    2. Small-sized Electromotor:Can directly immerse it into Type 902C cleaner without removing the motor .and seize it from the liquid after several minutes.Dry it with compressed air.
    Due to it that the lubricating oil and bearing oil have been simultaneously washed away.please add to the lubricating oil again.


    3. Other Electric and Mechanic Equipment: Blow off the iron powder, dust. carbonic powder and other sundries with compressed air and wash them with Type 902C cleaner again, and then dry them thoroughly with air.


    4. Mechanic Parts and Components: Put the parts and components removed from the equipment into type 902C liquid for a momenfand seize them from the liquid.then dry them with cloth or compressed air.


    5. When clean them with Type 902C cleaner through a spray can,should adopt" Leather bellows" or electric wind to dry them.


    Points for Attention


    1. To the DC and high-voltage motors and the abnormal heating or seriously contaminative electric apparatuses, must cut off the power first.clean them then and dry them fully with air
    at last.
    2. Because of solvent type odour.the environment should be ventilated when use it.
    3. Don't use it to clean electronic computers.electronic program control devices, data processing facilities and other precision electronic devices and equipment.
    4. Please far away from the fire source when use it.
    5. The compressed air used for operation shouldn't contain any steam or should be dried.
    6. After using.necessary to seal it.
    7. Storage: It shoule be far away from the fire source.


    Package
    25kg per plastic barrel
    亚洲国产精品久久艾草